BRIDJIT 3-Piece Expandable Curb Ramp Set


Starting at $98/month with

The BRIDJIT Curb Ramp is an expandable 3-piece system that reduces the jarring effect of driving over a residential rolled curb by as much as 80%.

Estimated Delivery: Wed, Oct 4th to Fri, Oct 6th

Frequently Bought Together:


BRIDJIT Curb Ramp Set with Extra Center Section (4 pieces)


Estimated Delivery: Wed, Oct 4th to Fri, Oct 6th


The BRIDJIT Curb Ramp is an expandable 3-piece system that reduces the jarring effect of driving over a residential rolled curb by 80%. Most people who add the BRIDJIT ramps to their driveway report a big improvement in comfort and reduced wear and tear on their vehicle.

BRIDJIT Curb Ramps are suitable for use with all types of vehicles: cars, trucks, golf carts, motorcycles, boat trailers, wheeled carts, hand trucks…anything with wheels that has to go over a rolled curb!


BRIDJIT Curb Ramps Prevent Vehicle Wear and Tear


A BRIDJIT Curb Ramp doesn't just making entering and exiting your driveway more comfortable – it also benefits your vehicle:

  1. Repeated suspension impacts can lead to wheel misalignment and increase shock/strut wear.
  2. Many vehicles – especially lower ground clearance vehicles – will scrape against or drag along the curb, causing damange.
  3. If your vehicle's wheels are out of alignment, you'll see faster than usual tire wear, and a possible decrease in fuel economy.

Whether you have a low ground clearance sports car, a conversion van, or even a truck that pulls a trailer, a BRIDJIT Curb Ramp can save you money on vehicle wear and tear.

BRIDJIT Is Made In The USA From Recycled Tires

BRIDJIT Curb Ramps are Made In The USA from recycled tires:

  • We support American manufacturing
  • Our ramps aren't shipped halfway around the world, reducing our carbon footprint
  • Our ramps are made to US environmental standards - no illegal chemicals or processes

More than 270 million tires end up in US landfills every year. When you buy a set of BRIDJIT ramps, you're taking tires out of a landfill and supporting American workers.


BRIDJIT Ramps Are Easy To Install

Installing your BRIDJIT Curb Ramps is easy:

  • Each ramp section is boxed separately and shipped to your door
  • You place the ramps on your curb, and follow the included instructions
  • When you connect the ramps together, use a screwdriver to pry the bolts away from the rubber

No concrete, no toxic adhesives, and no drilling needed!

Make Sure BRIDJIT Ramps Will Work For Your Curb

Reviews - Our Customers Love Our Ramps

1-5 of 24 reviews
  1. The thickness of outer edges of ramp created bigger problems for my entry with car into garage.

  2. It slides every time I pull in the drive and I cannot move it back. I have to ask my son or neighbor. Anyone want a used one?

  3. Dont work well on culdesac / slightly curved entrance. Frequently gets pushed out into road and requires repositioning.

  4. The ramp is not fitting my driveway entrance area. The documentation stated that they would fit even into a slightly curved space. It fits well on one side (the left side looking at the pictures), but rides up above the driveway surface on the other (right) side, which you will see in the attached pictures. Need some help please to resolve this problem, as the ramps do not work very well for my situation. Please contact me phone (610) 909-3542 or email [email protected]

    Image #1 from Michael Martin
    Image #2 from Michael Martin
    Image #3 from Michael Martin
  5. I’ll be honest, I was really pulling for being able to give a glowing recommendation because these are all over our neighborhood before we purchased ours, but I can’t. The installation was nowhere near as easy as the install video indicates. It’s very hard to raise up the bolt to screw on the nuts and one of the bolts provided did not have any thread on it. And since installed, the ramp keeps sliding down to rest flat rather than diagonally as designed.

Product Specs and Additional Details

  • BRIDJIT Curb Ramps are made from recycled tires, extremely durable, and warrantied against defects for 5 years.
  • The left and right sections of our ramp set are tapered to allow for ease of parallel parking, and to decrease the possibility of tripping.
  • Our ramp set is expandable, with additional center sections available.
  • Our ramps have a water channel on the underside of each section that allows water to flow under the ramp, ensuring proper drainage.
  • BRIDJIT Curb Ramps was founded in 2008, with headquarters in Portland, Oregon.
Review ID: 94206
Click to view full size image.
  • Each ramp section is 47” long, 16” wide, and roughly 2.5” tall. A completely assembled set will be 141” in length (just shy of 12 feet).
  • Each individual section weighs approximately 50 pounds, for a total weight of 153 pounds when assembled into a standard ramp.
  • Galvanized bolts measure 0.5” x 7.5” and are pre-inserted into the center section to connect the three sections. Additional center sections are assembled in the same fashion.
  • The 2.5” height at the center tapers to 0.75” at the end of each ramp. This ensures a smooth transition between road and driveway.
  • Please note that all returns are subject to a restocking fee. See our FAQ page for more information.