BRIDJIT 3-Piece Expandable Curb Ramp Set

Original price was: $499.00.Current price is: $419.00.

Starting at $98/month with

The BRIDJIT Curb Ramp is an expandable 3-piece system that reduces the jarring effect of driving over a residential rolled curb by as much as 80%.

Estimated Delivery: Wed, May 1st to Fri, May 3rd

Frequently Bought Together:

Sale!

BRIDJIT Curb Ramp Set with Extra Center Section (4 pieces)

Original price was: $698.00.Current price is: $568.00.

Estimated Delivery: Wed, May 1st to Fri, May 3rd

What Is BRIDJIT?

The BRIDJIT Curb Ramp is an expandable 3-piece system that reduces the jarring effect of driving over a residential rolled curb by 80%. Most people who add the BRIDJIT ramps to their driveway report a big improvement in comfort and reduced wear and tear on their vehicle.

BRIDJIT Curb Ramps are suitable for use with all types of vehicles: cars, trucks, golf carts, motorcycles, boat trailers, wheeled carts, hand trucks…anything with wheels that has to go over a rolled curb!

photo-4-home

BRIDJIT Curb Ramps Prevent Vehicle Wear and Tear

brj-rv

A BRIDJIT Curb Ramp doesn't just making entering and exiting your driveway more comfortable – it also benefits your vehicle:

  1. Repeated suspension impacts can lead to wheel misalignment and increase shock/strut wear.
  2. Many vehicles – especially lower ground clearance vehicles – will scrape against or drag along the curb, causing damange.
  3. If your vehicle's wheels are out of alignment, you'll see faster than usual tire wear, and a possible decrease in fuel economy.

Whether you have a low ground clearance sports car, a conversion van, or even a truck that pulls a trailer, a BRIDJIT Curb Ramp can save you money on vehicle wear and tear.

BRIDJIT Is Made In The USA From Recycled Tires

BRIDJIT Curb Ramps are Made In The USA from recycled tires:

  • We support American manufacturing
  • Our ramps aren't shipped halfway around the world, reducing our carbon footprint
  • Our ramps are made to US environmental standards - no illegal chemicals or processes

More than 270 million tires end up in US landfills every year. When you buy a set of BRIDJIT ramps, you're taking tires out of a landfill and supporting American workers.

BRJ_Green

BRIDJIT Ramps Are Easy To Install

Installing your BRIDJIT Curb Ramps is easy:

  • Each ramp section is boxed separately and shipped to your door
  • You place the ramps on your curb, and follow the included instructions
  • When you connect the ramps together, use a screwdriver to pry the bolts away from the rubber

No concrete, no toxic adhesives, and no drilling needed!

Make Sure BRIDJIT Ramps Will Work For Your Curb

Reviews - Our Customers Love Our Ramps

1-5 of 15 reviews
  1. Didn’t work properly, the road crown was too steep, needs to be a foot wider. My Prius still scrapes the front bumper entering or leaving the driveway. The 25% charge to return the ramps was a bit excessive in my opinion. Will not be recommending this product to anyone that I like.

  2. I have yet to receive my bridjit, it says it was delivered on December 20th but not to my house.

  3. I haven’t received my full shipment and it’s been some time now.

  4. The screws were so tight once in that we cracked the rubber trying to put the bolt on the end of the screw so we did not do that for the other three and left the one that was just barely on with the crack in the rubber so it would not get any larger.

  5. Shipment was never to happen as you have a local distributor in Denver.

Product Specs and Additional Details

  • BRIDJIT Curb Ramps are made from recycled tires, extremely durable, and warrantied against defects for 5 years.
  • The left and right sections of our ramp set are tapered to allow for ease of parallel parking, and to decrease the possibility of tripping.
  • Our ramp set is expandable, with additional center sections available.
  • Our ramps have a water channel on the underside of each section that allows water to flow under the ramp, ensuring proper drainage.
  • BRIDJIT Curb Ramps was founded in 2008, with headquarters in Portland, Oregon.
Review ID: 94206
Click to view full size image.
  • Each ramp section is 47” long, 16” wide, and roughly 2.5” tall. A completely assembled set will be 141” in length (just shy of 12 feet).
  • Each individual section weighs approximately 50 pounds, for a total weight of 153 pounds when assembled into a standard ramp.
  • Galvanized bolts measure 0.5” x 7.5” and are pre-inserted into the center section to connect the three sections. Additional center sections are assembled in the same fashion.
  • The 2.5” height at the center tapers to 0.75” at the end of each ramp. This ensures a smooth transition between road and driveway.
  • Please note that all returns are subject to a restocking fee. See our FAQ page for more information.